It is by using natural resources such as tidal or wind energy – collectively known as ‘Green Energy’ – that we could meet our daily energy needs. They’re all considered naturally able to replenish – and thereby ‘Green’. It is easy to think that we may be travelling back in time when we think of items such as wind power and windmills. Generally, this is the result of using up to date ideas, specifically those that are planet friendly and eco-efficient.
In the home environment, one can see examples such as Solar Thermal and Solar Water Heating Collectors. To gain electricity from roof panels you would need solar electrical panels (PV’s). Following on from this is a process known as Biomass Energy – which includes Boilers burning wood and other fuels. We now also have Ground Source Heat Pumps – which draw out the heat left by the Sun. Finally, we have two of the most traditional forms of energy generation that have gone through some resurgence over the last few years; these being Wind Power, Wind Turbines and Hydropower (including Water Wheels.)
Thermal Solar Energy Systems: Typically referred to as Solar Energy this is mainly made up of two types of Solar Panels – each using different methods to achieve similar results. To begin with, we have the concept of drawing energy from the Sun to heat water – known as Solar Water Heating Collectors. Additionally, there is the method of converting solar radiation into electricity known as Photovoltaic – or simply Solar Electrical panels. Solar Panels themselves need to be away from all light blocks, and should be on south facing roofs at angles of 30 degrees from the horizontal plane.
Within Solar Energy overall, Solar Water Power is most commonly used in the UK. With the capacity to deliver 50 percent plus of a household’s hot water requirement annually, Solar Water heating systems are crucial to energy in the UK. The average cost of installing this type of equipment is expected to range from 500 to 1500 pounds for a DIY system, through to 2-5k for a professionally installed system.
Biomass Energy Based Systems: Historically, this has come from plants and animals, though nowadays this also includes new genetcially engineered ‘energy crops’. Considering its ability to produce energy in the form of heat and electricity, this type of energy is extremely flexible. Furthermore, within the European Markets, the UK is one of the central producers of Biomass fuels. Considering all this, and the relative lack of C02 produced, makes the whole process highly green overall. Much of the UK wood crop is sustainable, in order to ensure that C02 produced during any heating process is absorbed.
Within this field is the need for the use of ‘Energy Crops’, such as fast growing trees, e.g. Willow and Poplar or other entities grown on a Short Rotation Coppice (SRC). Also producing high yields of dry matter are the perennial grasses. Equally significant within this practice sit Municipal and Agricultural waste products. To begin with, Agricultural Waste is often produced as part of the agricultural process overall. However, waste derived from food or wood is another biomass entity – called Municipal Waste.
Systems Based On Geo-Thermal Energy: Used in the generation of both warm water and electricity, this energy mainly comes from the Sun and heats the Earth. Using the ground temperature of around 12 degrees in the UK – we can both heat and cool buildings. Generally, items such as Heat Pumps are thought of as very effective, as they produce four units of energy for every one that is used for generation. A greate return of energy (sometimes almost 100 percent) is produced – because heat source pumps can operate in-line with wind turbines and solar electrical panels.
Systems Based On Wind Energy: When you consider the milling of grain and pumping of water, it is easy to see how long wind energy has been with us. Whether to your home or to a local grid, when the energy has been generated it must be delivered to a point of usage – and cannot be stored. In fact, the UK has the largest wind resource within Europe. Although we only utilise 1 percent of the current electricity capability from wind – we do have the ability to create 10 percent. Overall, electricity could be generated from as low as 2p per kWh – instead of the current 2-10 p per kWh. Because of this, it is estimated that it takes between half a year to three quarters of a year to cover the installation costs.
Hydropower is a method that suits the UK energy production system. The field of using moving water to release energy is a very old technique – albeit we now do this in new ways. It is this type of energy production that could meet 2 percent of all the UK’s demand.
The Hydropower process uses a turbine that can convert the energy from one form into another. The important thing is that, without having to rely on water storage, the turbines can generate electricity. It is by using the eroded national distribution systems, that allows for outdated sluices and dams to be used by techniques known as ‘Micro-Hydro’. This smaller form of electrical output has been recently reviewed and could allocate some 200MW of capacity to the UK system. The capital cost of installing a micro-hydro system can run between 200 and 3000 pounds per kW of energy output.
‘Green Energy’ is growing – mainly due to the demands of the Western World. That said, the UK is well placed – especially in the domestic sector – to take full advantage of the items above.
With the rise in demand for domestic installations, both Electricians and Plumbers are well placed to take advantage of this technology. With ‘Green Energy’ rising up the political agenda in Europe, a range of financial aids and grants are becoming available. It is important to gain the correct qualifications to install these items. Electrical or plumbing training that incorporates green technology could be very useful for the future.
(C) 2009 S. Edwards. Pop to Solar Energy Courses or www.electricaltraininguk.co.uk/Solar-Energy-Training.html.